99530500 : This electrically powered low heat tool will enable detailed graphics with the wax colours.
Size: 152mm x 25mm diameter (without any tip fitted)
Cable: 1850mm long (approximately)
It comes complete with:
2 x Drawing Tips (Ref#99530600)
1 x Wire Brush head (Ref#99530700)
Small stand (optional to use)
Abrasive paper (for careful reshaping of tips)
Voltage 230/40v – 200watts – Britsh or Euro plug – choose during add to cart
*default with British 3 pin plug or choose euro plug – 220-240volt only).
USA residents – to buy a UL approved Iron (USA Std) you need to forget this site and any items chosen so far and change to ordering from the USA site at www.encausticart.us
Stylus Pro tips information: The new threaded tips will fit into the hole in the old Stylus and can be gripped there using the normal side screw fitting. Just be mindful that if the side screw is tightened very hard and the tip is not fully inserted then it could be gripping onto the thread area which is more vulnerable – but all in all it is fine. The crucible will not work as the old stylus is a single heat – low enough to operate the drawing tips and brush but hot enough to heat the larger attachments. Basically, the smaller tips will heat fine but bigger tips like the wide petal may not get hot enough for easy working and the crucible will not work.